Portable Gas Detection
Simplicity counts with the MSA GALAXY® GX2 Automated Test System for advanced safety management and effortless operation. The GALAXY GX2 Automated Test System provides simple, intelligent testing and calibration of ALTAIR 2X Single-Gas Detectors and ALTAIR 4XR and ALTAIR 5X Multigas Detectors. Easy-to-use automated test stand offers high performance as either stand-alone unit or integrated portable detector management system, enabling total data access and control of the MSA ALTAIR family Gas Detector fleet.
All ALTAIR 2X Gas Detectors * Incorporate proven XCell® sensor technology * Enhance worker safety, compliance and traceability * Minimize cost of ownership * Demonstrate rugged durability Product Options * ALTAIR 2XP Gas Detector with XCell Pulse Technology: H2S - * Features the first stand-alone bump test, which eliminates the need for bottled gas! * Bump test anytime, anywhere * Based on proven science and patented sensor capabilities * ALTAIR 2XP Gas Detector with XCell Pulse Technology: H2S * ALTAIR 2X Gas Detectors: CO, CO-HC (High Concentration), CO-H2 (Hydrogen Resistant), H2S-LC, SO2, NO2, NH3 and Cl2 * ALTAIR 2XT Two-Tox Gas Detector: CO/H2S, CO-H2/H2S, CO/H2S-LC, CO/NO2 and SO2/H2S-LC
The ALTAIR io 4 is a secure, smart gas detector with out-of-the-box connectivity packed into an ultra-rugged design - featuring our XCell sensor platform which continues to lead the industry in lifetime & durability. The ALTAIR io 4 was designed from the ground-up to work seamlessly with the MSA Grid and the ALTAIR io Dock, providing hassle-free compliance, effortless fleet management & incredible visibility into your worker safety that you've never had before.
The io 4 Dock enables effortless calibration and bump testing which helps to improve compliance and safety. When in the io Dock, the Altair io 4 portable gas detector knows when it needs a bump test and immediately runs the appropriate test. When the ALTAIR io 4 is in the Dock, all compliance reporting is sent immediately to your MSA Grid account, helping to minimize the risks associated with manual record keeping or data file management.
Outfitted with rapid-response MSA XCell® sensors, the ALTAIR 4XR Gas Detector is the toughest 4-gas monitor on the market and is backed by a 4-year warranty.
With the ALTAIR io 4 & MSA Grid, the MSA id Tag digitally and instantly assigns a detector with a simple tap to provide device assignment visibility – in the heat of emergency response, for post-incident review, device service or for enhanced record compliance.
The ALTAIR 5X Gas Detector is capable of measuring up to 6 gases simultaneously and is now available with integrated PID sensor for VOC detection. Driven by advanced MSA XCell® Sensor Technology, the ALTAIR 5X Gas Detector delivers faster response time, better stability, accuracy, longer service life, and cost savings over the life of the instrument.
MSA Link Pro Software will be discontinued as of Sept. 30, 2019. While you’ll still be able to receive support for your existing Link Pro Software, it has been replaced in practical terms by Safety io’s new and more powerful Fleet Manager software as a service (SaaS). No new software developments for MSA Link Pro will be available after June 2019. To transition to Fleet Manager and upgrade your gas detector management program, schedule a demo with Safety io today
Pair up to six (6) ALTAIR 4XR and 5X detectors at a time with your Android device via ALTAIR Connect to... * Receive detector compliance reminders * E-mail calibration, sampling & event reports * Update detector settings
Designed for superior lifespan—patented sensors operate for over two years—and high performance, the ALTAIR Single-Gas Detector is the smart choice for market-leading, cost-effective gas monitors. Features sensor options for carbon monoxide, hydrogen sulfide, and oxygen coupled with LED/audible/vibrating alarms. Superior dust/water protection, high RFI resistance, and one-button operation provide heightened safety, plus increased durability and ease-of-use.
MSA offers a complete line of calibration gas cylinders to calibrate all instruments. The gas mixture in calibration gas cylinders is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder.
Based on the industry-standard ALTAIR Single-Gas Detector—but with added features and functionality—ALTAIR Pro toxic gas and oxygen detectors combine reliable detection and LED/audible/flashing/vibrating alarms with clear, backlit LCD displays. Electrochemical sensors measure concentrations of toxic gas (chlorine dioxide, hydrogen cyanide and phosphine) or percent oxygen. Purpose-built for superior dust and water protection, excellent impact resistance and excellent RFI performance.
The ALTAIR Pump Probe is a rugged sampling accessory for MSA gas detection instruments. Capable of drawing samples from up to 50ft (15m) away with standard sampling line, quickly convert diffusion instruments for use in remote sampling applications. Visual inspection of filter and quick change components simplify maintainence. Rugged unibody construction provides unsurpassed durability and Li Ion battery ensures long run time even in cold weather.
Regulators are used to ensure you receive the required flow of calibration gas for your application. Based on the cost-efficient design of its diffusion based gas detectors, MSA is able to use 0,25 lpm regulators. This save users’ money by delivering calibration test gas at a low rate of 0,25 lpm versus 0,50 lpm which is the market standard. For pumped instruments, the easy to use Gas Miser Demand Regulator is recommended which delivers the required gas flow rate automatically
This Infrared Dongle Adapter enables a connection between ALTAIR Portable Gas Detectors, and MSA Link software. MSA Link software is used to configure ALTAIR detector settings and read logs at a per-detector basis.