Kits de calibrage et accessoires

SB100 Ultrasonic Bump Tester

SB100 Ultrasonic Bump Tester

The SB100 is a hand-held battery-operated rechargeable ultrasonic tester designed to bump test General Monitors ultrasonic gas leak detectors. The SB100 is useful for quick tests where physical access to the ultrasonic gas detector can be difficult. The unit can be used to bump test up to 18 meters away from the detector in Class 1, Div 1&2 hazardous areas.
Ultima® Controller Télécommande de maintenance

Ultima® Controller Télécommande de maintenance

Le controller Ultima permet de réaliser toutes les opérations de paramétrage et de maintenance de l'ULTIMA X. Grâce à la liaison de communication infrarouge et à sa certification de sécurité intrinsèque, toutes les opérations sont réalisées en zone ATEX sous tension.
Ultima® Calibrator Télécommande de maintenance

Ultima® Calibrator Télécommande de maintenance

Le calibrateur Ultima avec ses 3 touches et son interface IR offre la plus simple des méthodes de calibrage pour les détecteurs de gaz. L’instrument de sécurité intrinsèque peut être également utilisé pour modifier l’adressage d’un détecteur de gaz ULTIMA X3.
Cellules à perle catalytique

Cellules à perle catalytique

Les cellules de gaz à perle catalytique de General Monitors sont réputées pour leur sensibilité, leur fiabilité et leur longévité, faisant d'elles le premier choix pour la plupart des personnes ayant recours au principe de détection de gaz à oxydation catalytique. Chaque composant est fabriqué en interne afin de garantir une performance optimale. Un appariement minutieux des éléments actifs et de référence ("beads") permet de produire une cellule ayant une dérive du zéro presque négligeable à l’égard des changements d’humidité, de pression et de température.
Catalytic Bead Accessories

Catalytic Bead Accessories

General Monitors offers a wide variety of accessories for our catalytic bead gas sensors.
IR Gas Detector Accessories

IR Gas Detector Accessories

General Monitors offers a wide variety of accessories for infrared gas leak detection.
H2S Gas Sensors and Accessories

H2S Gas Sensors and Accessories

General Monitorsʼ hydrogen sulfide (H2S) sensors are solid state devices, designed and manufactured for long life and fast response. They are selective to H2S and remain unaffected by high concentrations of other substances like hydrogen, sulfur dioxide, and gasoline vapors, which are often present in facilities that process sour gas and crude oil. A high tolerance to a broad range of temperatures and humidity enable these sensors to operate in rugged environments, as does their capacity to withstand exposure to high H2S concentrations over short periods.
Cellules de gaz électrochimiques

Cellules de gaz électrochimiques

Les cellules de gaz électrochimiques de General Monitors sont hautement sensibles aux gaz toxiques, notamment au monoxyde de carbone, H2S, hydrogène, chlorure d’hydrogène, ammoniac, chlore, dioxyde de chlore, monoxyde d’azote, dioxyde d’azote, ozone et SO2, ainsi qu’au manque d’oxygène.
Toxic Gas Accessories

Toxic Gas Accessories

General Monitors offers a wide variety of accessories for our toxic gas detectors.
RGC - Remote Gas Calibrator for Catalytic Bead Sensors

RGC - Remote Gas Calibrator for Catalytic Bead Sensors

The Remote Gas Calibrator (RGC) allows calibration gas to be applied to a remotely located catalytic bead sensor from an easily accessible location. The RGC is used for blocking ambient air and redirecting methane to the catalytic sensor for calibration or testing sensor accuracy. The RGC tests or calibrates the General Monitors catalytic sensor with 50% LEL methane. The unit is capable of calibrating gas at wind velocities up to 50 mph. The RGC is used manually with a pressure regulator (P/N 80146-1) and is suitable for calibrating with any light hydrocarbon.
RGC-IR - Remote Gas Calibrator for Point IR Detectors

RGC-IR - Remote Gas Calibrator for Point IR Detectors

The remote gas calibrator, RGC-IR, is designed to be permanently installed on a combustible IR gas detector. The RGC-IR provides protection from outside elements and allows the user to apply calibration gas (@ 50 psi) to the detector from a remote source.
RGC-HT - Remote Gas Calibrator for High Temperatures

RGC-HT - Remote Gas Calibrator for High Temperatures

To verify the proper operation of a catalytic combustible gas sensor, it is necessary to periodically apply a gas of known concentration to the sensor. This is usually done manually at the site with gas supplied from a small lecture bottle. As the sensor reacts to the calibration gas, adjustments are made to the monitoring system to bring its calibration into agreement with the known concentration of the calibration gas. At times, sensors are mounted in inaccessible locations, requiring expensive catwalks or scaffolding to reach them. The High Temp Remote Gas Calibrator (RGC-HT) allows the calibration gas to be applied to the catalytic bead sensor from easily accessible locations. The RGC-HT is used for blocking ambient air and redirecting methane or other light hydrocarbon gases to the catalytic bead sensor for calibration or testing sensor accuracy in various environments. The RGC-HT tests or calibrates the General Monitors Catalytic Bead sensor with 50% LEL methane or other light hydrocarbon gas. The unit is capable of calibrating and detecting gases in various wind conditions (up to 45 mph) and temperatures (up to 200°C when used with high temperature sensor).
ARGC - Automatic Remote Gas Calibrator

ARGC - Automatic Remote Gas Calibrator

To verify the proper operation of a catalytic combustible gas sensor, it is necessary to periodically apply a gas of known concentration to the sensor. This is usually done manually at the site with gas supplied from a small lecture bottle. As the sensor reacts to the calibration gas, adjustments are made to the monitoring system to bring its calibration into agreement with the known concentration of gas. At times, sensors are mounted in inaccessible locations, requiring expensive catwalks or scaffolding to reach them. The Automatic Remote Gas Calibrator (ARGC) allows the calibration gas to be applied to the catalytic bead sensor from easily accessible locations. The ARGC is used for blocking ambient air and redirecting methane to the catalytic sensor for calibration or testing sensor accuracy. The ARGC tests or calibrates the General Monitors catalytic sensor with 50% LEL methane. The unit is capable of calibrating gas at wind velocities up to 50 mph. Note: the RGC (P/N 80153-1), used manually with a pressure regulator (P/N 80147-1), is suitable for calibrating with any light hydrocarbon.
1701 Portable Test and Calibration Unit

1701 Portable Test and Calibration Unit

The 1701 is a portable test and calibration unit used to verify the operation and calibrate certain ultrasonic gas leak detectors. Although the detectors do not require regular maintenance, the 1701 can be used to satisfy the requirements for regular plant maintenance. Further, the 1701 requires no electrical connection to the gas leak detector but is simply placed over the sensor head of the gas leak detector.
Mounting Hardware

Mounting Hardware

General Monitors offers a complete line of mounting hardware to facilitate installing any of our gas and flame detectors in commercial or industrial facilities.
Select up to 3 items to compare Liste de comparaison (0)